Request a Quote

Get Started

3032 StingRay Parts Washer

Retractable Turntable Aircraft Wheel Parts Washer

Retractable Turntable Aircraft Wheel Parts WasherThe StingRay 3032 Aircraft Wheel Washer, cleans wheels, bearings and brakes in one machine. The turntable space cleans one wheel half at a time in short cleaning cycles. The washer power density and the patented oscillating power wash manifold removes rubber bead, carbon dust, grease, oil and soils from Aircraft wheels without brushes. Use the automatic cleaning cycle to wash, rinse and dry aerospace wheels, bearings and brakes. It produces four to six clean and dry aircraft wheel halves in a closed loop cycle every hour. For more details please visit the case studies on Aircraft Wheel Cleaning in the parts washer applications section.

USA Specifications:

SR 3032
Parts Washer

Metric Specifications:

SR 3032
Parts Washer

Standard Features & General Construction

  • Green Technology: Closed Loop Zero Discharge & High Efficiency
  • Stainless Steel Cabinet & Wetted Standard Components
  • Heavy gage 3/16" Sheet Cabinet Thickness
  • Pump with Stainless Steel Shafts, Fasteners and Viton Seals
  • Auto Fresh Water Rinse Cycle
  • Auto Steam Exhaust System
  • Auto Programmable Oil Skimmer System
  • Engineered Wheel Wash Power Blast Manifold
  • Oscillating Wash Manifold to Maximize Cleaning
  • 1 Station Aircraft Wheel Fixture fits most wheel sizes
  • Removable Internal Reservoir Cover allows Full Access to machine reservoir
  • Swing Door Retracting Turntable for Maximum Access
  • Electronic Water Level Control & Refill
  • Easy to Service Front Wash Pump Suction Strainer
  • Adjustable Electronic Digital Temp Control, 2 line display present value & set-point
  • Control Transformer External of Panel minimizes Heat
  • Programmable 24 Hour 7 Day Clock
  • Low Water Shut-off Protects Pumps & Heating System
  • Electronic Door Safety Interlock
  • Wash Cycle Timer with Auto Reset
  • 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls Standard
  • 208 VAC or 575 VAC optional
  • International 50 Hz upgrades for 380, 400, 415 VAC 
  • Chemical Resistant Two Part 3 mil Epoxy Coating


Aircraft Bearing Washer and Bearing Fixture StingRay Aerospace Parts Washer Bearing Fixture Aircraft StingRay Aircraft Wheel Washer Aerospace Cleaning
Washing Bearings Bearing Fixture Door Closed


Work Area Dimensions: US Metric
Turntable Diameter: 30 inches 760 mm
Work Height: 32 inches 813 mm

Table Load Capacity:

1000 lbs 453 kg
Overall Dimensions: US Metric
Width: (Std Unit) 66 inches 1670 mm
Depth: (Std Unit) 67 inches 1700 mm
Height: 78 inches 1980 mm
Empty Weight: 3150 lbs 1430 kg
Reservoir Capacity: 130 gallons 492 liters
Sludge Capacity: 37 gallons 140 liters
Spray Blast Manifold:
Angle of Oscillation: (Picture) 39 Degrees
Frequency of Oscillation: 4 per minute
Number of Wash Nozzles: (Picture) 20
Type of Nozzle: V-Jet
Nozzle Material: 316 Stainless
Heating System: US Metric
Operating Temperature: 140-190 degrees F 60-87 degrees C
Initial Heat up Time: 60-90 minutes 60-90 minutes
Electric Heat Element Size: (Picture)** 45 kW 45 kw
Gas / Propane (Picture)  180,000 BTU/hr  53 kW
Electrical Panel (Picture) US Metric
Motor Starters: Across the Line Across the Line
Short Circuit Protection: Std Std
Overload Protection: Std Std
Electrical Enclosures: NEMA 12 IP65
Wiring Standard: NFPA 79  
Wiring Conduit: Flex-Non-Metallic Flex-Non-Metallic
Conduit Type: Liquidtight Nema 12 Liquidtight IP65
Pump System & Performance:  
Motor Type: (Picture) Energy-Efficient
Motor Rating: Continuous Duty
Motor Enclosures: TEFC

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.

Standard: 30 hp (US) 22.5 kW (Metric)
Total System Flow: 256 gpm 1013 l/min
Flow per Nozzle: 16.0 gpm 64 l/min
System Pressure: 152 psi 11.4 bar
Blast Velocity: 150 ft/sec 48 m/sec
Power Density: 2.29 hp/ft³ 87 kW/m³

 Aircraft Wheel Cleaning Result Washer 
Aircraft Wheel Cleaning Result

Results may vary based on machine configuration.
** Heating element sizes listed for 208, 240 & 480 volt systems. Sizes vary slightly for other voltages.


StingRay Parts Washers

HD Retractable Turntable Models
In-line Lift Door
Aircraft Wheel Washer Systems