Request a Quote

Get Started

3055 StingRay Parts Washer

Retractable Turn Table Parts Washer

StingRay Heavy Duty Parts Washer SR3055

The StingRay 3055 Aqueous Parts Cleaning machine is engineered for cleaning engines, transmissions, and components in automotive shops. The StingRay 3055 Parts Washer can pre-wash a complete engine prior to remanufacture in less than 6 minutes.  The high parts cleaning power makes it popular for cleaning engine heads and components and electric motors and bearings for rebuilding.  The SR3055 parts washer is perfect for new manufacturing cleaning applications where work cells need a closed loop industrial parts washer that can wash, fresh water rinse and apply Rust Inhibitor without discharging solution in the work area.

USA Specifications:

SR 3055 Parts Washer

Metric Specifications:

SR 3055 Parts Washer

Standard Features & General Construction

  • Green Technology: Closed Loop Zero Discharge
  • Heavy 7 gauge (3/16 inch) thick cabinet walls and reservoir
  • Swing Door Retracting Turntable for Maximum Access
  • Electronic Water Level Control & Refill
  • Oscillating Wash Manifold to Maximize Cleaning
  • Easy to Service Front Wash Pump Suction Strainer
  • Adjustable Electronic Temp Control, Temp Gauge
  • Control Transformer External of Panel minimizes Heat
  • Programmable 24 Hour 7 Day Clock
  • Low Water Shut-off Protects Pumps & Heating System
  • Electronic Door Safety Interlock
  • Wash Cycle Timer with Auto Reset
  • Heavy gauge 3/16" Sheet Steel Cabinet Thickness
  • 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls
  • 50 Hertz 380V and other worldwide voltages available
  • Chemical Resistant Two Part 3 mil Epoxy Coating

 

Work Area Dimensions: US Metric
Turntable Diameter: 30 inches 760 mm
Work Height: 55 inches 1397 mm
Table Load Capacity: 1000 lbs 453 kg
Heavy Duty Capacity: 1500 lbs 680 kg
Overall Dimensions: US Metric
Width: (Std Unit) 67 inches 1702 mm
Depth: (Std Unit) 63 inches 1600 mm
Height: 95 inches 2413 mm
Empty Weight: 3550 lbs 1610 kg
Reservoir Capacity: 130 gallons 192 liters
Duplex Reservoir: Add 47 gallons Add 178 liters
Sludge Capacity: 37 gallons 140 liters
Spray Blast Manifold:
OSCILLATING NON-SYNCHRONOUS
Angle of Oscillation: (Picture) 39 Degrees
Frequency of Oscillation: 4 per minute
Number of Wash Nozzles: (Picture) 20
Type of Nozzle: V-Jet
Nozzle Material: 316 Stainless
Heating System: US Metric
Operating Temperature: 140-190 degrees F 60-88 degrees C
Initial Heat up Time: 60-120 minutes 60-120
Electric Heat Element Size: (Picture)** 30 kW 30 kw
 Gas / Propane (Picture)  180,000 BTU/hr  53 kW
Electrical Panel (Picture) US Metric
Motor Starters: Across the Line Across the Line
Short Circuit Protection: Std Std
Overload Protection: Std Std
Electrical Enclosures: NEMA 12 IP65
Wiring Standard: NFPA 79  
Wiring Conduit: Flex-Non-Metallic Flex-Non-Metallic
Conduit Type: Liquidtight Nema 12 Liquidtight IP65
Pump System & Performance:
Motor Type: (Picture) Energy-Efficient
Motor Rating: Continuous Duty
Motor Enclosures: TEFC

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.

STANDARD: 20 hp (US) 15 kW (Metric)
Total System Flow: 269 gpm 1020 l/min
Flow per Nozzle: 13.5 gpm 51 l/min
System Pressure: 107 psi 7.4 bar
Blast Velocity: 126 ft/sec 38 m/sec
Power Density: 0.89 hp/ft³ 21 kW/m³
UPGRADES: (SIMPLEX) 30 hp (US) 22 kW (Metric) 40 hp (US) 30 kW (Metric)
Total System Flow: 301 gpm 1140 l/min 319 gpm 1210 l/min
Flow per Nozzle: 15.1 gpm 57 l/min 16.0 gpm 61 l/min
System Pressure: 134 psi 9.2 bar 150 psi 10.3 bar
Blast Velocity: 141 ft/sec 43 m/sec 149 ft/sec 45 m/sec
Power Density: 1.06 hp/ft³ 31 kW/m³ 1.41 hp/ft³ 42 kW/m³
UPGRADES: (DUPLEX) 55 hp (US) 41 kW (Metric) 70 hp (US) 52 kW (Metric)
Total System Flow: 356 gpm 1350 l/min 371 gpm 1400 l/min
Flow per Nozzle: 17.8 gpm 67 l/min 18.6 gpm 70 l/min
System Pressure: 187 psi 13 bar 203 psi 14 bar
Blast Velocity: 166 ft/sec 51 m/sec 173 ft/sec 53 m/sec
Power Density: 1.94 hp/ft³ 58 kW/m³ 2.47 hp/ft³ 73 kW/m³

 

Results may vary based on machine configuration.
** Heating element sizes listed for 208, 240 & 480 volt systems. Sizes vary slightly for other voltages.

 

StingRay Parts Washers

HD Retractable Turntable Models
In-line Lift Door
Aircraft Wheel Washer Systems