Request a Quote

Get Started

4063 StingRay Parts Washer

Retractable Turntable Parts Washers

Industrial Parts Washer StingRay SR4063

The StingRay 4063 Parts Washer is one of the most popular models because of the Hi-profile work area.   Engineered for washing Komatsu and Caterpillar off-road equipment's mid-sized diesel engines prior to rebuild. It's also a perfect fit for degreasing rail bearings, electric motors and many other industrial parts cleaning applications that utilize the correct parts washer power density and oscillating power wash manifold offered in the 4063 Parts Washer. StingRay can also lengthen the work height for washing taller parts to fit your parts cleaning needs.

USA Specifications:

SR 4063 Parts Washer

Metric Specifications:

SR 4063 Parts Washer

Standard Features & General Construction:

  • Green Technology: Closed Loop Zero Discharge
  • Heavy 7 gauge (3/16 inch) thick cabinet walls and reservoir
  • Swing Door Retracting Turntable for Maximum Access
  • Electronic Water Level Control & Refill
  • Oscillating Wash Manifold to Maximize Cleaning
  • Easy to Service Front Wash Pump Suction Strainer
  • Adjustable Electronic Temp Control, Temp Gauge
  • Control Transformer External of Panel minimizes Heat
  • Programmable 24 Hour 7 Day Clock
  • Low Water Shut-off Protects Pumps & Heating System
  • Electronic Door Safety Interlock
  • Wash Cycle Timer with Auto Reset
  • Heavy gauge 3/16" Sheet Steel Cabinet Thickness
  • 208V, 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls
  • 50 Hertz 380V and other worldwide voltages available
  • Chemical Resistant Two Part 3 mil Epoxy Coating

Work Area Dimensions: US Metric
Turntable Diameter: 41 inches 1040 mm
Work Height: 63 inches 1600 mm

Table Load Capacity:

1500 lbs 680 kg
Heavy Duty Capacity: 3500 lbs 1590 kg
Overall Dimensions: US Metric
Width: (Std Unit) 79 inches 2000 mm
Depth: (Std Unit) 74 inches 1870 mm
Height: 105 inches 2660 mm
Empty Weight: 4300 lbs 1950 kg
Reservoir Capacity: 180 gallons 681 liters
Duplex Reservoir: Add 47 gallons Add 178 liters
Sludge Capacity: 47 gallons 178 liters
Spray Blast Manifold:
OSCILLATING NON-SYNCHRONOUS
Angle of Oscillation: (Picture) 39 Degrees
Frequency of Oscillation: 4 per minute
Number of Wash Nozzles: (Picture) 20
Type of Nozzle: V-Jet
Nozzle Material: 316 Stainless
Heating System: US Metric
Operating Temperature: 140-190 degrees F 60-88 degrees C
Initial Heat up Time: 60-120 minutes 60-120 minutes
Electric Heat Element Size: (Picture)** 30 kW 30 kw
 Gas / Propane (Picture)  180,000 BTU/hr  53 kW
Electrical Panel (Picture) US Metric
Motor Starters: Across the Line IEC Type 2
Short Circuit Protection: Std Coordinated
Overload Protection: Std Thermal Class 10
Electrical Enclosures: NEMA 12 IP65
Wiring Standard: NFPA 79  NFPA 70
Wiring Conduit: Flex-Non-Metallic Flex-Non-Metallic
Conduit Type: Liquidtight Nema 12 Liquidtight IP65
Pump System & Performance:  
Motor Type: (Picture) Energy-Efficient
Motor Rating: Continuous Duty
Motor Enclosures: TEFC

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.

STANDARD: 20 hp (US) 15 kW (Metric)
Total System Flow: 269 gpm 1020 l/min
Flow per Nozzle: 13.5 gpm 51 l/min
System Pressure: 107 psi 7.4 bar
Blast Velocity: 126 ft/sec 38 m/sec
Power Density: 0.44 hp/ft³ 10 kW/m³

 

UPGRADES: (SIMPLEX) 30 hp (US) 22 kW (Metric) 40 hp (US) 30 kW (Metric)
Total System Flow: 301 gpm 1140 l/min 319 gpm 1210 l/min
Flow per Nozzle: 15.1 gpm 57 l/min 16.0 gpm 61 l/min
System Pressure: 134 psi 9.2 bar 150 psi 10.5 bar
Blast Velocity: 141 ft/sec 43 m/sec 149 ft/sec 45 m/sec
Power Density: .65 hp/ft³ 15 kW/m³ .87 hp/ft³ 21 kW/m³

 

UPGRADES: (DUPLEX) 55 hp (US) 41 kW (Metric) 70 hp (US) 52 kW (Metric)
Total System Flow: 356 gpm 1350 l/min 371 gpm 1400 l/min
Flow per Nozzle: 17.8 gpm 67 l/min 18.6 gpm 70 l/min
System Pressure: 187 psi 12.9 bar 203 psi 14 bar
Blast Velocity: 166 ft/sec 51 m/sec 173 ft/sec 53 m/sec
Power Density: 1.2 hp/ft³ 28 kW/m³ 1.53 hp/ft³ 36 kW/m³

 

Results may vary based on machine configuration.
** Heating element sizes listed for 208, 240 & 480 volt systems. Sizes vary slightly for other voltages.

 

StingRay Parts Washers

HD Retractable Turntable Models
In-line Lift Door
Aircraft Wheel Washer Systems