Parts Washers 
Large Retractable Turntable Parts Washers |
|
|||
|
|||
Work Area Dimensions: |
US | Metric |
Turntable Diameter: Work Height: Table Load Capacity: Heavy Duty Capacity: |
73 inches 73 inches 10,000 lbs 20,000 lbs |
1820 mm 1850 mm 4530 kg 9060 kg |
| Overall Dimensions: | US | Metric |
Width: (Std Unit) Depth: (Std Unit) Height: Empty Weight: Reservoir Capacity: Duplex Reservoir: Sludge Capacity: |
137 inches 106 inches 133 inches 14,000 lbs 600 gallons Add 47 gallons 100 gallons |
3470 mm 2690 mm 3370 mm 6324 kg 2271 liters 178 liters 379 liters |
Spray Blast Manifold: |
|||
Angle of Oscillation: (Picture) Frequency of Oscillation: Number of Wash nozzles: (Picture) Type of Nozzle: Nozzle Material: |
39 Degrees 4 per minute 24 V-Jet 316 Stainless |
||
Heating System: |
US | Metric | |
Operating Temperature: Initial Heat up Time: |
140-190 degrees F 60 - 90 minutes 120 kW 800,000 BTU/hr |
60-87 degrees C 60 - 90 minutes 120 kw 229 kW |
|
Electrical Panel (Picture) |
US | Metric |
Motor Starters: Short Circuit Protection: Overload Protection: Electrical Enclosures: Wiring Standard: Wiring Conduit: Conduit Type: |
Across the Line Std Std NEMA 12 NFPA 79 Flex-Non-Metallic Liquidtight NEMA12 |
Across the Line Std Std IP65
Flex-Non-Metallic Liquidtight IP65 |
Pump System & Performance: |
||||||||||
|
Motor Rating: Motor Enclosures: |
Energy-Efficient Continuous Duty TEFC |
|||||||||
| High Efficiency, Rated for continuous duty (20 Start/hour without overheating),
vertical, centrifugal, seal-less, balanced, enclosed impeller.
Note: All performance data taken at nozzle discharge. |
||||||||||
 |
|||||||||
30 hp |
22 kW
|
||||||||
US |
Metric |
||||||||
Total System Flow: Flow per Nozzle: System Pressure: Blast Velocity: |
343 gpm 14.3 gpm 121 psi 133 ft/sec 0..17 hp/ft³ |
1297 l/min 54 l/min 8 bar 41 m/sec 4 kW/m³ |
|||||||
 |
||||
55 hp |
41 kW |
70 hp |
52 kW |
|
US |
Metric |
US |
Metric |
|
Total System Flow: Flow per Nozzle: System Pressure: Blast Velocity: |
399 gpm 16.6 gpm 163 psi 155 ft/sec 0.32 hp/ft³ |
1508 l/min 63 l/min 11 bar 47 m/sec 8 kW/m³ |
371 gpm 18.6 gpm 203 psi 173 ft/sec 0.89 hp/ft³ |
1402 l/min 70 l/min 14 bar 53 m/sec 21 kW/m³ |
| REQUEST A QUOTE |
|---|
Results may vary based on machine configuration
Home | Site Map | Products | Custom Solutions | Service | Chemicals | Contact Us
2450 Adie Road, Suite 200
St. Louis, MO 63043
Phone # 314-447-9000
Fax # 314-447-0909
e-mail - sales@stingwash.com