Caterpillar and Komatsu Parts Washer - StingRay 3040 Retractable Turntable Parts Washers
 
  Caterpillar and Komatsu Cleaning Solution  
Industrial Parts Washers for cleaning Komatsu  


StingRay 4063 Parts Washer

Retractable Turntable Parts Washers

The StingRay 4063 Parts Washer is one of the most popular models because of the Hi-profile work area.   Engineered for washing Komatsu and Caterpillar off-road equipment's mid-sized diesel engines prior to rebuild. It's also a perfect fit for degreasing Rail Bearings, Electric Motors and many other industrial parts cleaning applications that utilize the correct parts washer power density and oscillating power wash manifold offered in the 4063 Parts Washer. StingRay can also lengthen the work height for washing taller parts to fit your parts cleaning needs.

Leader in Caterpillar Parts Washing

Caterpillar Diesel Engine Parts Washer
  • Caterpillar Parts Washer Green TechnologyGreen Technology: Closed Loop Zero Discharge
  • Swing Door Retracting Turntable for Maximum Access
  • Electronic Water Level Control & Refill
  • Oscillating Wash Manifold to Maximize Cleaning
  • Easy to Service Front Wash Pump Suction Strainer
  • Adjustable Electronic Temp Control, Temp Gage
  • Control Transformer External of Panel minimizes Heat
  • Programmable 24 Hour 7 Day Clock
  • Low Water Shut-off Protects Pumps & Heating System
  • Electronic Door Safety Interlock
  • Wash Cycle Timer with Auto Reset
  • Heavy gage 3/16" Sheet Steel Cabinet Thickness
  • 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls
  • Chemical Resistant Two Part 3 mil Epoxy Coating



Turntable Diameter:

Work Height:

Table Load Capacity:

Heavy Duty Capacity:

41 inches

63 inches

1500 lbs

3500 lbs

1040 mm

1600 mm

680 kg

1586 kg



Width: (Std Unit)

Depth: (Std Unit)

Height:

Empty Weight:

Reservoir Capacity:

Duplex Reservoir:

Sludge Capacity:

79 inches

74 inches

105 inches

4300 lbs

180 gallons

Add 47 gallons

47 gallons

2000 mm

1870 mm

2660 mm

1948 kg

681 liters

178 liters

178 liters



OSCILLATING NON-SYNCHRONOUS (Video)

     

Angle of Oscillation: (Picture)

Frequency of Oscillation:

Number of Wash nozzles: (Picture)

Type of Nozzle:

Nozzle Material:

39 Degrees

4 per minute

20

V-Jet

316 Stainless


Operating Temperature:

Initial Heat up Time:

Electric Heat Element Size: (Picture)

Gas / Propane (Picture)

140-190 degrees F

60 - 90 minutes

30 kW

180,000 BTU/hr

60-87 degrees C

60 - 90 minutes

30 kw

53 kW


Motor Starters:

Short Circuit Protection:

Overload Protection:

Electrical Enclosures:

Wiring Standard:

Wiring Conduit:

Conduit Type:

Across the Line

Std

Std

NEMA 12

NFPA 79

Flex-Non-Metallic

Liquidtight NEMA12

Across the Line

Std

Std

IP65

 

Flex-Non-Metallic

Liquidtight IP65


Motor Type: (Picture)

Motor Rating:

Motor Enclosures:

Energy-Efficient

Continuous Duty

TEFC

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.
Note: All performance data taken at nozzle discharge.

 
 

Total System Flow:

Flow per Nozzle:

System Pressure:

Blast Velocity:

Power Density:

269 gpm

13.5 gpm

107 psi

126 ft/sec

0.44 hp/ft³

1017 l/min

51 l/min

7 bar

38 m/sec

10 kW/m³

301 gpm

15.1 gpm

134 psi

141 ft/sec

0.65 hp/ft³

1138 l/min

57 l/min

9 bar

43 m/sec

15 kW/m³

319 gpm

16.0 gpm

150 psi

149 ft/sec

0.87 hp/ft³

1206 l/min

61 l/min

10 bar

45 m/sec

21 kW/m³

   

  Caterpillar and Komatsu Parts Washer Duplex Pump
 

Total System Flow:

Flow per Nozzle:

System Pressure:

Blast Velocity:

Power Density:

356 gpm

17.8 gpm

187 psi

166 ft/sec

1.2 hp/ft³

1346 l/min

67 l/min

13 bar

51 m/sec

28 kW/m³

371 gpm

18.6 gpm

203 psi

173 ft/sec

1.53 hp/ft³

1402 l/min

70 l/min

14 bar

53 m/sec

36 kW/m³


    REQUEST A QUOTE

Results may vary based on machine configuration

 

Home | Site Map | Products | Custom Solutions | Service | Chemicals | Contact Us


 

StingRay 4063 PARTS WASHER
Optional Features:

PARTS WASHER Configuration
50 Hz Engineered System
Auto Steam Exhaust
Center Manifold Probe
Heat Source- Gas, Electric, Steam
Heavy Duty Duplex Pump
High Speed Evaporation Drying
Hot-Air Blow-Off
Gas Burner Option
Pump Pressure Regulator
Short High Impact Manifold (Video)
Stainless Steel Cabinet
Stainless Steel Heat Exchanger
Stretched Work Height Mild Steel
Stretched Work Height Stainless Steel
World Model

PARTS WASHER Productivity

Automatic Lubrication System
Chip Baskets
Closed Loop Rinse System
Hand Rinse Wand
High-Low Pressure Switch
High Output Electric Heat
Hour Meter
Remote Grease Lubrication Points
Rinse Rust-Inhibtor Injector System
Pump Amp Meter
Pump Upgrades
Turntable Capacity
Turntable Jog

PARTS WASHER Solution Management
In-Line Filtration
Oil Coalescing System
Oil Skimmers
Sludge Pump Cart
Sludge Scraper
Solution Transfer Pump

PARTS WASHER Safety
Cabinet Noise Reduction Insulation
Chemical Spill Containment Pan
Industrial Control & Safety Disconnect
Internal Reservoir Cover
Pump Sound Barrier

PARTS WASHER Material Handling
Parts Cleaning Baskets
Parts Cleaning Fixtures
Parts Cleaning Tie-Down Ratchet Strap
Parts Loading Jib Crane
Turntable Anchoring Attachments

PART WASHER Energy Conservation
Cabinet Thermal Insulation
Internal Reservoir Cover

 

PARTS WASHER Details & Specifications
Standard Features
Optional Features

 
©2009 StingRay Parts Washers
 

 

StingRay Manufacturing LLC
2450 Adie Road, Suite 200
St. Louis, MO 63043

Phone # 314-447-9000
Fax # 314-447-0909

e-mail - sales@stingwash.com

Industrial Parts Washer Home for Green Technology Parts Washer Complete Product Line Parts Washer Custom Solution Parts Washer Repair Parts and Service Parts Washer Detergent, Soap, and Solution Parts Washer Customer Service