Large Clamshell Parts Washer
The StingRay 10090 Clamshell industrial parts washer is engineered for heavy duty parts cleaning in many different industrial applications when the part weight exceeds 20,000 lbs / 12,684 kg. Applications include repair and rebuild of wind mill and wind turbine gearboxes, gear cases, precision gears, crane gear boxes, diesel engines, generators and surface mining equipment . The clamshell design provides complete access for loading and unloading parts weighing up to 60,000 lbs / 27,180 kg. Fast, highly reliable and unsurpassed cleaning capability is the StingRay parts washer trademark.
Standard Features & General Construction
- Green Technology: Closed Loop Zero Discharge
- Swing Door Retracting Turntable for Maximum Access
- Electronic Water Level Control & Refill
- Oscillating Wash Manifold to Maximize Cleaning
- Easy to Service Front Wash Pump Suction Strainer
- Adjustable Electronic Temp Control, Temp Gauge
- Control Transformer External of Panel minimizes Heat
- Programmable 24 Hour 7 Day Clock
- Low Water Shut-off Protects Pumps & Heating System
- Electronic Door Safety Interlock
- Wash Cycle Timer with Auto Reset
- Heavy gauge 1/4" Plate Steel Cabinet Thickness
- 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls
- Chemical Resistant Two Part 3 mil Epoxy Coating
| Work Area Dimensions: |
US |
Metric |
| Turntable Diameter: |
100 inches |
2540 mm |
| Work Height: |
90 inches |
2280 mm |
|
Table Load Capacity:
|
28,000 lbs |
12,684 kg |
| Heavy Duty Capacity: |
60,000 lbs |
27,180 kg |
| Overall Dimensions: |
US |
Metric |
| Width: (Std Unit) |
160 inches |
4064 mm |
| Depth: (Std Unit) |
133 inches |
3378 mm |
| Height: |
153 inches |
3886 mm |
| Empty Weight: |
25,300 lbs |
11,480 kg |
| Reservoir Capacity: |
960 gallons |
3634 liters |
| Quadroplex Reservoir: |
Add 60 gallons |
Add 227 liters |
| Sludge Capacity: |
160 gallons |
606 liters |
| Spray Blast Manifold: |
| OSCILLATING NON-SYNCHRONOUS Video |
| Angle of Oscillation: (Picture) |
40 Degrees |
| Frequency of Oscillation: |
4 per minute |
| Number of Wash Nozzles: (Picture) |
32 |
| Type of Nozzle: |
V-Jet |
| Nozzle Material: |
316 Stainless |
| Heating System: |
US |
Metric |
| Operating Temperature: |
180 degrees F |
60-88 degrees C |
| Initial Heat up Time: |
120 minutes |
120 minutes |
| Electric Heat Element Size: (Picture)** |
120 kW |
120 kw |
| Gas / Propane (Picture) |
990,000 BTU/hr |
290 kW |
| Electrical Panel (Picture) |
US |
Metric |
| Motor Starters: |
Across the Line |
IEC Type 2 |
| Short Circuit Protection: |
Std |
Coordinated |
| Overload Protection: |
Std |
Thermal Class 10 |
| Electrical Enclosures: |
NEMA 12 |
IP65 |
| Wiring Standard: |
NFPA 79 |
NFPA 79 |
| Wiring Conduit: |
Flex-Non-Metallic |
Flex-Non-Metallic |
| Conduit Type: |
Liquidtight Nema 12 |
Liquidtight IP65 |
| Pump System & Performance: |
|
| Motor Type: (Picture) |
Energy-Efficient |
| Motor Rating: |
Continuous Duty |
| Motor Enclosures: |
TEFC |
High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.
| STANDARD: |
70 hp (US) |
52 kW (Metric) |
| Total System Flow: |
502 gpm |
1900 l/min |
| Flow per Nozzle: |
15.7 gpm |
59 l/min |
| System Pressure: |
152 psi |
10.5 bar |
| Blast Velocity: |
156 ft/sec |
46 m/sec |
| Power Density: |
0.17 hp/ft³ |
6.5 kW/m³ |
| UPGRADES: (Quadroplex) |
140 hp (US) High Flow |
104 kW (Metric) High Flow |
140 hp (US) High Pressure |
104 kW (Metric) High Pressure |
| Total System Flow: |
1004 gpm |
3800 l/min |
860 gpm |
3251 l/min |
| Flow per Nozzle: |
15.7 gpm |
59 l/min |
19.9 gpm |
75 l/min |
| System Pressure: |
152 psi |
10.5 bar |
190 psi |
13.1 bar |
| Blast Velocity: |
156 ft/sec |
46 m/sec |
198 ft/sec |
58 m/sec |
| Power Density: |
0.34 hp/ft³ |
13 kW/m³ |
0.34 hp/ft³ |
13 kW/m³ |
Results may vary based on machine configuration.
** Heating element sizes listed for 208, 240 & 480 volt systems. Sizes vary slightly for other voltages.
