Parts Washers

Aircraft Wheels Approved Cleaning Method

Stingray 6036 Parts Washer

Retractable Turntable Aircraft Wheel Parts Washer

The StingRay 6036 Aircraft Wheel Washer offers the necessary parts washer power density and the patented oscillating power wash manifold to quickly and thoroughly clean Aircraft Wheels of rubber bead, carbon dust, grease, oil and soils. StingRay Engineering worked closely with the US military and many users in the airline and aerospace industry to develop this high efficiency method for cleaning aircraft wheels. The StingRay 6036 parts washer runs an automatic cleaning cycle to wash, rinse and dry aerospace wheels and aircraft brakes. It produces eight to twelve dry aircraft wheel halves in a closed loop cycle every hour. For more details please visit the case studies on Aircraft Wheel Cleaning in the parts washer applications section.

Standard Features & General Construction:

SR 6036 Parts Washer
Printer Version PDF

Green Technology: Closed Loop Zero Discharge & High Efficiency
Stainless Steel Cabinet & Wetted Standard Components
Heavy gage 3/16" Sheet Cabinet Thickness
Pump Upgrade Stainless Steel Shafts, Fasteners and Viton Seals
Auto Fresh Water Rinse Cycle
Auto Steam Exhaust System
Auto Programmable Oil Skimmer System
Engineered Wheel Wash Power Blast Manifold
Oscillating Wash Manifold to Maximize Cleaning
4 Station Aircraft Wheel Fixture
Removable Internal Reservoir Cover allows Full Access
Swing Door Retracting Turntable for Maximum Access
Electronic Water Level Control & Refill
Easy to Service Front Wash Pump Suction Strainer
Adjustable Electronic Temp Control, Temp Gage
Control Transformer External of Panel minimizes Heat
Programmable 24 Hour 7 Day Clock
Low Water Shut-off Protects Pumps & Heating System
Electronic Door Safety Interlock
Wash Cycle Timer with Auto Reset
230 V or 460 V - 60 Hz 3-Phase with 120 V Controls
Chemical Resistant Two Part 3 mil Epoxy Coating

Work Area Dimensions:

Metric

Turntable Diameter:

Work Height:

Table Load Capacity:

60 inches

36 inches

2000 lbs

1520 mm

914 mm

909 kg

Overall Dimensions:

Metric

Width: (Std Unit)

Depth: (Std Unit)

Height:

Empty Weight:

Reservoir Capacity:

Sludge Capacity:

106 inches

91 inches

93 inches

6650 lbs

397 gallons

80 gallons

2690 mm

2310 mm

2360 mm

3012 kg

1325 liters

303 liters

Spray Blast Manifold:
OSCILLATING NON-SYNCHRONOUS (Video)

Angle of Oscillation: (Picture)

Frequency of Oscillation:

Number of Wash nozzles: (Picture)

Type of Nozzle:

Nozzle Material:

39 Degrees

4 per minute

V-Jet

316 Stainless

Heating System:

Metric

Operating Temperature:

Initial Heat up Time:

Electric Heat Element Size: (Picture)

Gas / Propane (Picture)

140-190 degrees F

60 - 90 minutes

80 kW

400,000 BTU/hr

60-87 degrees C

60 - 90 minutes

80 kw

117 kW

Electrical Panel (Picture)

Metric

Motor Starters:

Short Circuit Protection:

Overload Protection:

Electrical Enclosures:

Wiring Standard:

Wiring Conduit:

Conduit Type:

Across the Line

Std

NEMA 12

NFPA 79

Flex-Non-Metallic

Liquidtight NEMA12

Across the Line

Std

IP65

Flex-Non-Metallic

Liquidtight IP65

Pump System & Performance:
Motor Type: (Picture) Motor Rating: Motor Enclosures:	Energy-Efficient Continuous Duty TEFC

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.

STANDARD:
	70 hp	52 kW
	US	Metric
Total System Flow: Flow per Nozzle: System Pressure: Blast Velocity: Power Density:	371 gpm 18.6 gpm 212 psi 173 ft/sec 1.19 hp/ft³	1402 l/min 70 l/min 14.4 bar 53 m/sec 31 kW/m³

		REQUEST A QUOTE

Results may vary based on machine configuration

StingRay 6036
Aircraft Wheel Washer
Optional Features:

PARTS WASHER Configuration
50 Hz Engineered System
Auto Steam Exhaust
Center Manifold Probe
Heat Source- Gas, Electric, Steam
Heavy Duty Duplex Pump
High Speed Evaporation Drying
Hot-Air Blow-Off
Gas Burner Option
Pump Pressure Regulator
Short High Impact Manifold (Video)
Stainless Steel Cabinet
Stainless Steel Heat Exchanger
Stretched Work Height Mild Steel
Stretched Work Height Stainless Steel
World Model

PARTS WASHER Productivity
Automatic Lubrication System
Chip Baskets
Closed Loop Rinse System
Hand Rinse Wand
High-Low Pressure Switch
High Output Electric Heat
Hour Meter
Remote Grease Lubrication Points
Rinse Rust-Inhibtor Injector System
Pump Amp Meter
Pump Upgrades
Turntable Capacity
Turntable Jog

PARTS WASHER Solution Management
In-Line Filtration
Oil Coalescing System
Oil Skimmers
Sludge Pump Cart
Sludge Scraper
Solution Transfer Pump

PARTS WASHER Safety
Cabinet Noise Reduction Insulation
Chemical Spill Containment Pan
Industrial Control & Safety Disconnect
Internal Reservoir Cover
Pump Sound Barrier

PARTS WASHER Material Handling
Parts Cleaning Baskets
Parts Cleaning Fixtures
Parts Cleaning Tie-Down Ratchet Strap
Parts Loading Jib Crane
Turntable Anchoring Attachments

PART WASHER Energy Conservation
Cabinet Thermal Insulation
Internal Reservoir Cover

PARTS WASHER Details & Specifications
Standard Features
Optional Features

StingRay Manufacturing LLC
2450 Adie Road, Suite 200
St. Louis, MO 63043

Phone # 314-447-9000
Fax # 314-447-0909
e-mail - sales@stingwash.com