Parts Washers

Aircraft Wheels Approved Cleaning Method

Stingray 4036 Parts Washer

Retractable Turntable Aerospace Wheel Parts Washer

The StingRay 4036 Aircraft Wheel Washer provides high parts washer power density and the unique oscillating power wash manifold to thoroughly remove rubber bead, carbon dust, grease, oil and soils in quick cycles from Aircraft Wheels. Working closely with the US military and other end users in the airline and aerospace industry, StingRay Engineering developed this wheel cleaning system for washing aircraft wheels for inspection and rebuild. The StingRay 4036 parts washer features a fully automatic cleaning cycle with wash, rinse and dry cycles for aerospace wheels and aircraft brakes. The wheel washer system yields four to six clean and dry aircraft wheel halves in a closed loop cycle per hour. Additional details are available in the case study on Aircraft Wheel Cleaning in the parts washer applications section.

Stingray_SR4036_Aircraft_wheel_washer

Standard Features & General Construction:

SR 4036 Parts Washer
Printer Version PDF

Green Technology: Closed Loop Zero Discharge & High Efficiency
Stainless Steel Cabinet & Wetted Standard Components
Heavy gage 3/16" Stainless Steel Cabinet Thickness
Pump Upgrade Stainless Steel Shafts, Fasteners and Viton Seals
Auto Fresh Water Heated Rinse Cycle
Auto Steam Exhaust System
Auto Programmable Oil Skimmer System
Engineered Wheel Wash Power Blast Manifold
Oscillating Washer Manifold Nozzles to Maximize Cleaning
2 Station Aircraft Wheel Washing Fixture
Removable Internal Reservoir Cover allows Full Access
Swing Door Automatic Retracting Parts Washer Turntable for Maximum Access
Electronic Water Level Control & Refill
Easy to Service Front Wash Pump Suction Strainer
Adjustable Electronic Temp Control, Temp Gage
Control Transformer External of Panel minimizes Heat
Programmable 24 Hour 7 Day Clock
Low Water Shut-off Protects Pumps & Heating System
Electronic Door Safety Interlock
Wash Cycle Timer with Auto Reset
230 V or 460 V - 60 Hz 3-Phase with 120 V Controls, 50 Hz optional
Chemical Resistant Two Part 3 mil Epoxy Coating

Work Area Dimensions:

Metric

Turntable Diameter:

Work Height:

Table Load Capacity:

40 inches

36 inches

1800 lbs

1016 mm

914 mm

818 kg

Overall Dimensions:

Metric

Width: (Std Unit)

Depth: (Std Unit)

Height:

Empty Weight:

Reservoir Capacity:

Sludge Capacity:

79 inches

74 inches

80 inches

4450 lbs

180 gallons

47 gallons

2010 mm

1890 mm

2030 mm

2020 kg

680 liters

178 liters

Spray Blast Manifold:
OSCILLATING NON-SYNCHRONOUS (Video)

Angle of Oscillation: (Picture)

Frequency of Oscillation:

Number of Wash nozzles: (Picture)

Type of Nozzle:

Nozzle Material:

39 Degrees

4 per minute

V-Jet

316 Stainless

Heating System:

Metric

Operating Temperature:

Initial Heat up Time:

Electric Heat Element Size: (Picture)

Gas / Propane (Picture)

140-190 degrees F

60 - 90 minutes

30 kW

180,000 BTU/hr

60-87 degrees C

60 - 90 minutes

30 kw

53 kW

Electrical Panel (Picture)

Metric

Motor Starters:

Short Circuit Protection:

Overload Protection:

Electrical Enclosures:

Wiring Standard:

Wiring Conduit:

Conduit Type:

Across the Line

Std

NEMA 12

NFPA 79

Flex-Non-Metallic

Liquidtight NEMA12

Across the Line

Std

IP65

Flex-Non-Metallic

Liquidtight IP65

Pump System & Performance:
Motor Type: (Picture) Motor Rating: Motor Enclosures:	Energy-Efficient Continuous Duty TEFC

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note: All performance data taken at nozzle discharge.

STANDARD: Simplex			UPGRADE: Duplex
	40 hp	30 kW	55 hp	52 kW
	US	Metric	US	Metric
Total System Flow: Flow per Nozzle: System Pressure: Blast Velocity: Power Density:	274 gpm 16.8 gpm 168 psi 159 ft/sec 1.53 hp/ft³	1040 l/min 64 l/min 11.6 bar 48.5 m/sec 41 kW/m³	303 gpm 18.9 gpm 212 psi 177 ft/sec 2.10 hp/ft³	1150 l/min 72 l/min 14.6 bar 54 m/sec 54 kW/m³

		REQUEST A QUOTE

Results may vary based on machine configuration

StingRay 6036
Aircraft Wheel Washer
Optional Features:

PARTS WASHER Configuration
50 Hz Engineered System
Auto Steam Exhaust
Center Manifold Probe
Heat Source- Gas, Electric, Steam
Heavy Duty Duplex Pump
High Speed Evaporation Drying
Hot-Air Blow-Off
Gas Burner Option
Pump Pressure Regulator
Short High Impact Manifold (Video)
Stainless Steel Cabinet
Stainless Steel Heat Exchanger
Stretched Work Height Mild Steel
Stretched Work Height Stainless Steel
World Model

PARTS WASHER Productivity
Automatic Lubrication System
Chip Baskets
Closed Loop Rinse System
Hand Rinse Wand
High-Low Pressure Switch
High Output Electric Heat
Hour Meter
Remote Grease Lubrication Points
Rinse Rust-Inhibtor Injector System
Pump Amp Meter
Pump Upgrades
Turntable Capacity
Turntable Jog

PARTS WASHER Solution Management
In-Line Filtration
Oil Coalescing System
Oil Skimmers
Sludge Pump Cart
Sludge Scraper
Solution Transfer Pump

PARTS WASHER Safety
Cabinet Noise Reduction Insulation
Chemical Spill Containment Pan
Industrial Control & Safety Disconnect
Internal Reservoir Cover
Pump Sound Barrier

PARTS WASHER Material Handling
Parts Cleaning Baskets
Parts Cleaning Fixtures
Parts Cleaning Tie-Down Ratchet Strap
Parts Loading Jib Crane
Turntable Anchoring Attachments

PART WASHER Energy Conservation
Cabinet Thermal Insulation
Internal Reservoir Cover

PARTS WASHER Details & Specifications
Standard Features
Optional Features

StingRay Manufacturing LLC
2450 Adie Road, Suite 200
St. Louis, MO 63043

Phone # 314-447-9000
Fax # 314-447-0909
e-mail - sales@stingwash.com